kennemetal tool library

[TECHSERV]

We use a number of Kennemetal lathe tools. None of the tools we have are in the MCam X tool library.

 

Does anyone know if there is an updated Kennemetal Library available?

 

Dave Savage

MCamX MR1

[Guest]

Have you checked Kennametals website?

 

Don't know if the offer it there but it might be worth a check.

[DavidB]

I also use Kennametal for turning and I can see every thing I need.

What are you refering too?

[Bob Hedrick]

Are you using the tool LIBRARY or insert and holder CATALOGUES? We provide a huge assortment of inserts and holders, so you can build your own tools. Not EVERY insert or holder is in the catalogues, as not all insert or holder shapes are currently supported using parametric geometry in Mastercam. Custom tool geometry must be used in these cases.

 

Check out the following Kennametal insert and holder catalogues from the Define Lathe Tool dialog:

X Kennametal Lathe Tooling(inch)

X Kennametal Lathe Tooling(mm)

 

These catalogues have many more inserts and holders than the old Kennamet catalogues.

[MrFish]

Old post but I am wondering if anyone has a copy of the X Kennametal Lathe Tooling(mm) ?

The only version that is supplied with lathe these days is an inch one.

Thanks

[Guest]

I have the mm library in 2018....delete it by accident?

X Kennametal Lathe Tooling (MM).LIC

X Kennametal Lathe Tooling (MM).zip

Edited December 5, 2017 by Guest

[MrFish]

1 hour ago, JParis said:

I have the mm library in 2018....delete it by accident?

X Kennametal Lathe Tooling (MM).LIC

X Kennametal Lathe Tooling (MM).zip

hmm, you are correct JParis, we do have that .lic file for the metric tools but there is only one "kennamet.toodb" file and this is all imperial tooling, so even with mertic sizing ticked in the tool manager we are getting converted imperial sizes ?