Solidworks 2001

[Kevin Goddard]

Hello all. I have been following this board for several months and have learned a lot just watching from the sidelines. We have 2 seats Mill, 1 seat Lathe level 3 ver.8.1.1 and Solidworks. We just updated Solidwoks to 2001 Plus and now are having trouble bringing in models. I can bring in a model drawn from our older solidworks but if drawn in 2001 Plus it gives an Parasolid Kernel Interface Error, Check PSLDDATA Dir. Any ideas what I am doing wrong or missing? Thanks in advance.

[cadcam]

Have you down loaded this Patch "Readps13inv8.exe" from the patchs area on this forum?

This should take care of the problem.

I have opened lots of 2001 SLDPART files with know trouble.

[Guest CNC Apps Guy 1]

Solidworks 2001 most likely uses Parasolid V13 kernel. You'll need to download this Read Parasolid V13 file.

Hope that helped.

[Guest CNC Apps Guy 1]

Darn, Jay beat me to it, but I put the link in my post Jay so na, na, na, na, na, na!

[Kevin Goddard]

You guys are GOOD. That worked. Thanks for the super fast response....Kevin

[cadcam]

Well Kev,

I am glad the Tag team was able to help.

[JOVATO8]

I too sit mainly on the sidelines Like Kevin and

read the board

I had the same problem in SOLIDWORKS when one of the companies we do work updated to 2001 PLUS.

I went to the forum and there was my problem and answer.

A BIG THANKS TO ALL YOU GUYS!

JOE

Anybody out there from Northlake ILL.?