Haas Post Question

[peon]

The gentleman on this forum have been very helpful. Most of my questions and problems have been solved by searching the archives, but now I'm stumped on a problem regarding my Haas Post. How do I eliminate the "|" in the following example? My Haas doesn't like it. Thanks.

 

%

O0000 (TEST)

(MASTERCAM - X)

(MCX FILE - C:DOCUMENTS AND SETTINGSMATTGDESKTOP11283_B_MAIN_INS.MCX)

(MATERIAL - NONE)

(PROGRAM - TEST.NC)

(DATE - JUL-28-2006)

(TIME - 12:17 PM)

(POST DEV - IN-HOUSE SOLUTIONS)

(T14 | 2" JETMILL | H14 | D14 | D2.0000" | R0.0780 | FACING.....)

(T12 | 1.0" DIA. ISCAR .0625 C.R. X 4.0" LONG | H12 | D12 | D1.0000" | R0.0625 | FACING.....)

(T20 | .500 FLAT ENDMILL | H20 | D20 | D0.5000" | | CONTOUR....)

(T9 | 5/8" DIA. CHAMFER X 1.50" LONG | H9 | D9 | D0.6300" | | CONTOUR....)

(T24 | .0625 BALL | H24 | D24 | D0.0625" | R0.0313 | CONTOUR....)

(T2 | 1/2" DIA. SPOT X 2.0" LONG | H2 | D2 | D0.5000" | | DRILL/CBORE)

(T5 | .4375 DRILL | H5 | D5 | D0.4375" | | PECK DRILL.)

(T17 | 1/2-13 RH TAP X 1.25" LONG | H17 | D17 | D0.5000" | | TAP........)

(OVERALL MAX - Z1.)

(OVERALL MIN - Z-2.5)

G00 G17 G20 G40 G80 G90

(ROUGH FACE)

T14 M06 (2" JETMILL)

(MAX - Z1.)

(MIN - Z.003)

G00 G90 G54 X-9.6 Y-5.7499 S1400 M03

G43 H14 Z1. M83 T12

Z.075

G01 Z.029 F170.

X8.6

[Guest]

Welcome to the Forum

 

Go down into the section of your post and delete or change them

 

code:

---

ptooltable # Write tool table, scans entire file, null tools are negative

tnote = t$

toffnote = tloffno$

tlngnote = tlngno$

spaces$=0

if t$ >= zero,

[

if tcr$>0, "(", *t$, ptspace, " | ", plistcomm, " | ", *tlngno$, phspace, " | ", *tloffno$, pdspace, " | ", *tldia$, punit, pdiamspc, " | ", *tcr$, " | ", popnote, ")", e$

if tcr$=0, "(", *t$, ptspace, " | ", plistcomm, " | ", *tlngno$, phspace, " | ", *tloffno$, pdspace, " | ", *tldia$, punit, pdiamspc, " | ", " | ", popnote, ")", e$

]

---

I have a Mori, that I had to change from "|"

to "-"

 

 

BTW,

 

ALWAYS backup your post before making any changes

[Rick Henrickson 65]

just change them to back slashes in your post

[Rick Henrickson 65]

john you are to quick

[peon]

WOW! I couldn't believe the quick response. Thanks guys! That did the trick, but now how do I limit the characters/block to less than 80 characters. The Haas controller errors when I have too many characters on one block.

[crazy^millman]

Do a search been covered many times

[peon]

The only advice I found doing a search was regarding the Control Def settings, but that didn't do the trick

[Rick Henrickson 65]

you can get rid of the d and r section

D2.0000" | R0.0780 | FACING.....)

I dont know what you want to see in your tool list but you can remove items you dont want

[Midwest]

mattstang70

 

web page to read

 

 

HTH

[Keith @ Solid Code Solutions]

quote:

---

john you are to quick

---

No Kidding! Hey John is this all you do.

[Guest]

Nah,

 

I work 50 hrs a week and do some 'grammin on the side. Well that's to say I am AT the place they say I work at 50 hrs a week.

 

 

Waz a matter, can't multi task?

 

[Keith @ Solid Code Solutions]

quote:

---

Waz a matter, can't multi task?

---

What's multi Tasking?

[Guest]

quote:

---

What's multi Tasking?

---

Being able to surf the Forum AND pretend to be programming at the same time.

 

 

[Keith @ Solid Code Solutions]

It's a good life!