mpgen5ax and X2

[MIL-TFP-41]

I have just installed X2 and have been playing around with a few things. One of the things is I have is a modified mpgen5ax post. The modfications have been in process from V9 to current date, lots of changes. This post is/was working great in X MR2. Now when I try to post with this in X2 I get the message

quote:

---

This post is designed to function with Mastercam V9 only!

---

any help???

[john316]

.

 

Run the update post c-hook.

 

.

[MIL-TFP-41]

will an updated post work in X MR2?

[Guest]

Updated from????

 

But yes a post updated from v9 to XMR2 should be fine.

 

I am still using my V9 updated posts.

 

I am however beginning the process of moving to X2 posts

[kccadcam]

quote:

---

will an updated post work in X MR2?

---

No, if you want to run X mr2 and X2 side by side you will need to keep the original X post and the one updated for X2....

 

Does anybody know if there is going to be a new mpgen5ax post for X2????

[gcode]

quote:

---

Does anybody know if there is going to be a new mpgen5ax post for X2????

---

This is the header for th 5X post installed by X2

 

 

# Post Name : Generic Fanuc 5X Mill

# Product : Mill

# Machine Name : Generic

# Control Name : Fanuc

# Description : Generic Fanuc 5 Axis Mill Post

# 4-axis/Axis subs. : Yes

# 5-axis : Yes

# Subprograms : No

# Executable : MP 11.0

#

# WARNING: THIS POST IS GENERIC AND IS INTENDED

FOR MODIFICATION TO

# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.

#

# Associated File List$

#

# GENERIC FANUC 5X MILL.control

#

# Associated File List$

#

# --------------------------------------------------------------------------

# Revision log:

# --------------------------------------------------------------------------

# Programmers Note:

# CNC 07/09/05 - Initial post update for Mastercam X.

# CNC 06/26/06 - Initial post update for Mastercam X2.