Cplane and Tplane "bug #cnc00020003"

[Pat-TGM]

Cplane and Tplane with Origin changed.

 

This problem was bring up before and it was reported " bug #cnc00020003 ". please, check link below

 

Links

 

 

X2 MR1 was samething, they didn't fix this bug#cnc00020003 yet !!!!!!!!!!!!!!

 

CNC Software, Please take a look.

[Pat-TGM]

Bump !!!!!!!

 

This bug was reported long time ago, and It still didn't fix with X2MR1Sp1

 

This Bug affected our regular daily jobs, So all our programmers refused to use X2

 

Anybody have same problems, Please input

[Qmp]

Paul,

 

We had same problems here, Specially this affected to 5-Asix (3+2) programmers a lot. I hope CNC will address this issue soon.

 

Qmp

[gcode]

How do you build your toolpanes for 3+2 work??

I use the Planes Rotate function and my origin

is aways 0,0,0.

At any rate, its very easy to check the origins of all your planes.

Planes/Nanmd View gives you a list of all planes

and origins, in one easy to read list

[cadcam]

I am not sure why you are not using Drill 5ax then pick the vetors and not set a new T/C for every hole .

If you are running Level one you can add the Drill 5ax.

[Pat-TGM]

Jay,

quote:

---

If you are running Level one you can add the Drill 5ax.

---

The other programmers have Level 1 only. Need add on licence for Drill 5ax.

 

 

Gcode,

 

quote:

---

How do you build your toolpanes for 3+2 work??

---

We pick Plane by normal to a line, solid face.... We used this method for last ten years without any problems.

 

This was reports a bug, So we need it fix

 

 

Thanks

[Roger Peterson]

Are you creating your planes from the "planes" button or from the "View Manager"?

[David Perron]

What is drill sax??

[Pat-TGM]

quote:

---

Are you creating your planes from the "planes" button or from the "View Manager"?

---

Both way, we get the same result. It create new origin position where geo is drawn.

 

 

quote:

---

What is drill sax??

---

He mean 5-axis drill toolpath

[Roger Peterson]

The only reason I ask is that if you create a plane via the view manager you can hit the red circle with a line through it to set the origin to 0,0,0. Via the planes button you would need to pick a point to reset it to 0,0,0. It's an extra click or two but I wouldn't let it keep me from using X2, there's soo many other things that more than make up for an extra click to create a plane.

 

 

If you are doing a lot of drilling you may want to check out prodrill if you haven't already.

 

 

HTH

[Pat-TGM]

Roger,

 

We do alot of milling and drilling with compound angle on aircraft parts. The drawing were created by hand about 30 years ago, 99% of them we don't have cad file, So we just create some 2d wire frame geo with points, lines and arcs for toolpath.

 

I already looked into other options, but in this case none of them meet our need.

 

quote:

---

It's an extra click or two but I wouldn't let it keep me from using X2,

---

Depend on your application: simple job = yes , complex job has more than 50 T/plane to create = No

 

 

quote:

---

Prodrill

---

Prodrill need 3d solid cad file.

 

That why we went crazy for this bug.

[Roger Peterson]

I see your point.

[Roger Peterson]

I see your point.

[Pat-TGM]

Bug#cnc00020003

 

X2 MR2 was samething, they didn't fix this bug#cnc00020003 yet !!!!!!!!!!!!!!

 

CNC Software, Please take a look and have any feedback please.

[Troy Gossett Indepak Inc.]

Paul e-mail here [email protected] for a faster response. (usually)