mc won,t stay on

[phil darcy]

I hope some body can help. I posted same problem earley and then changed video drive and though I was fixed. But again MC goes off and it seems to be when I am working on tool paths. It's going off so much I can't work.

Regenerate and rebuild does.t help!!!!!!!!!!!!

 

also doesn't seem to be just file howerer I am working on a group thats the same project

[Ployd]

Do you have any other programs running at the same time? How full is your hard drive?

 

These are basic but we have run into similar problems when working on toolpaths. We bought an external hard drive to free up space and extra ram.

[Steve Zirtzman]

How is your Hasp connected?

You should send a Zip2Go file to your Reseller and see if they can reproduce your problem.

[phil darcy]

hard drive has tons of room

 

no other programs on

 

2 gig ram

 

I should try to send a zip2go, but haven't

 

Thanks

[Steve Zirtzman]

I have heard of a Hasp causing similar problems.

[ebottens]

I actually had a similar problem yesterday. It seemed that it was the file itself was corrupted. If I opened up another file, it would work fine. Is it working ok with other files?