That's odd, I'm having the exact same problem!

Sometimes I just want to remove a pass or two at the end of the program. But it might take you 20 minutes to get to that pass just to delete it. I don't get it. Seems like a good feature but I thought maybe I was missing something. Thanks CNC

I was trying to edit a toolpath that had a couple funky moves. So I right clicked the op in the operation manager and selected toolpath editor. I may be missing something, but if you toggle through the pass or cut to get to the unwanted pass it takes forever. The little blue line slowly moves around the cut until you get to the next pass. Am I doing something wrong or is it really that slow to use. I adjusted my contaimnet boarder to correct the problem, but was wondering if people use it and am I doing something wrong.

Maybe your reseller might know of a good programmer that is available. Good luck

I noticed that also.

Don't laugh but we are using a Quadro NVS 280 and it is a real piece of poo. We have Alt W set up custom so I don't have to goto drop down Screen/Shade Setting and click the Translucent box.

Yup, Translucency crashed it also.

Only for you would I knowingly crash my computer while I'm working!!!!! I followed your instructions to a "T" and sure enough as soon as I hit Alt S she crashed and burned. Which is wierd because I always unshade or use Alt W Shading Translucency Toggle to see my chains. I'm going to try it again only this time I will try Alt W instead of Alt S and see if it still fails.

I don't do much with lead in/out since we cut mostly composites. But the other day I was trying to use it with a surface HST and I tried to draw a line off of my containment boundary and select that as my reference for lead in. But it didn't work. Will it show up in backplot? Should I be placing a point and choose that for my lead in position instead?

He's just frustrated trying to work out a problem. Mac's are superior to PC's and I wish I was using one right now! Our PC is POS!!!!!!!!!

Civic Dude, I used to work for WMH Tool Group, which purchased Powermatic, and is now located in La Vergne. Used to work with a nice guy from Murfreesboro. Nice area down there in the South. Hot and sticky in the summer!

JP - I would prefer to get a new computer with the latest Vista OS, but using dell refurbished you have to take the best package. Right now the best 64 bit computer they have available is the XP64. And we need to order the computer before the end of the year. So we will see what is available. The Vista64 computers available have lesser video cards and processors. We can always upgrade to Vista64 later.

Thanks for the info gcode, we have been getting by with this computer for sometime. Can't wait to get the new one. I would prefer to make the jump to Vista 64 bit, but there aren't a whole lot of 64 bit refurbished workstations out there that have the right config. We will have to see what is out there tomorrow when we are ready to place the order.

gcode - That's interesting, we are going to buy a new computer (dell refurbished) for MC tomorrow. I was looking at a 64 bit XP pro unit but should look at the vista instead. Here is what I'm looking at. Question - will I need a new version of office to go with the 64 - Bit? Any other things I need to think about while switching to 64 - Bit? Thanks! System Price : $2,649.00 -------------------------------------------------------------------------------- Operating System Genuine Windows XP x64 Professional -------------------------------------------------------------------------------- Memory 8 GB DDR2 ECC SDRAM 667MHz Dual Ranked (4 DIMMs) -------------------------------------------------------------------------------- Hard Disk Drive 160 GB SATA Hard Drive DataBurst(10K RPM) 160 GB SATA Hard Drive DataBurst(10K RPM) -------------------------------------------------------------------------------- Video Dual 768MB PCIe x16 nVidia Quadro FX 4600, Quad Monitor DVI Capable -------------------------------------------------------------------------------- Certified Refurbished Certified Refurbished -------------------------------------------------------------------------------- Base Precision Workstation T5400 Mini-Tower: Quad Core Intel Xeon Processor E5420 (2.50GHz, 2X6M L2,1333)

I've been upset (in the past) about how long it takes to process blend toolpaths. But now with X3 MU1 they are very quickly generated! Congratulations to MC for making a big improvement! Everything seems faster.