HELP toolpath problem

[cytek]

I have in X version use Angle Aggregate to machining the 2D contour toolpaths not to have the question,

similar method use when X2 version the Backplot cutting tool direction is not right. Is in the X2 version something must be set.

 

ThankS

 

[Thad]

Just a guess, but in the backplot settings (click the "!" in the backplot dialog box), uncheck "Simulate Rotary Axis."

 

Welcome to the forum!

 

Thad

[cytek]

Thank you the reply, uncheck "Simulate Rotary Axis." Invalid, the question or exists has not solved?

[crazy^millman]

Have you defined the tool in the Machine Manager? If it is not defined as an aggerate head then it will not come in X2 correctly. In the older version of X it would sometimes in X2 this seems to work better than in previous versions of X. The key is the machine manager. It not only has to be defined on the local copy, but make sure it updates to the operations copy. Any other question just post them up.

[cytek]

X and the X2 version I all have defined aggerate head in Machine Definition Manager, The method is all same.I find that in the X2 version if check the option "Translate NCI coordinates to Machine View with aggregate the" in Control definition , then the problem that cutting tool direction is error will occurred. But it is no problem in X version.Is there the solution.

 

Thanks