X3 Verify bug

[gms1]

I've sent this in to QC already and it is repeatable. Just thought I'd post it here so someone else doesn't get hit.

 

Select toolpaths to verify, click verify, click on the levels button on the bottom, click the green check mark, bam crash to desktop. It no likey the level manager being closed. This was done with a single monitor so I don't know how it behaves with the level manager on a different monitor.

[gms1]

Well this is interesting. Now it is crashing to the desktop just by closing the verify screen. I wonder if doing a side by side install has something to do with this.

[Matt@ShopWare]

Just tried this with a few files by right clicking the levels, left clicking, and hitting the green check back out, No crashes. Maybe it's something going on with your computer.

[Ray H.]

Sounds pretty scary so far should I load this X3 yet or wait for now?

 

Matt?

why did I not get my e-mail telling me to go ahead and download.

[88Matt]

I have x3 installed on two virgin machines. No other mc versions installed. When I run verify nothing is shown. The percent meter at the bottom of the verify toolbox runs but nothing else happens. It does this with either an old X2 file brought into X3 or a new file.