Mpmaster post question

[The Fastmill]

Hey fellas... I have been a long time user but can't figure out what my old login info was for the life of me and needed to get a question answered quick...

 

In the too list area when I post with the mpmaster mill post I get ...

 

code:

---

(T10  - .250 DIA 90 DEGREE SPOT DRILL - H10  - D0.2500")

(T11 - .246 DIA #D DRILL - H11 - D0.2460")

(T12 - .1935 DIA #10 DRILL - H12 - D0.1935")

(T13 - .252 DIA REAMER - H13 - D0.2520")

(T14 - .125 DIA 60 DEGREE ENGRAVING TOOL - H14 - D14 - D0.1250")

---

And I want this...

 

code:

---

(T10  - .250 DIA 90 DEGREE SPOT DRILL - H10)

(T11 - .246 DIA #D DRILL - H11)

(T12 - .1935 DIA #10 DRILL - H12)

(T13 - .252 DIA REAMER - H13)

(T14 - .125 DIA 60 DEGREE ENGRAVING TOOL - H14 - D14)

---

How do I make this happen?

 

Thanks in advance for all your help...

[Reece L Gibson]

Go In to the "ptooltable" post block and start cutting

[The Fastmill]

Thank you for pointing me in the right direction... I have figured out how to make the extra tool Dia info go away but now I am getting just the " mark on the drill lines only?!?

 

Help :-)

[Dave Ball]

look for a something like this----> , " , Basically everything between a , and the next , is output as a segment of code. It sounds like you left the " in place when you removed the tool Dia info. Just delete all of this where the tool Dia used to be ----> , " ,

[The Fastmill]

So far when I remove

, " - " ,

 

The only thing it removes is the -

 

?

 

I'll keep trying new stuff...

[The Fastmill]

I found it... when I remove punit, it got rid of the " mark

 

I'm sooo happy!!!

 

Now I need to figure out how to remove the file location path from the top of the nc file and I will be Very happy!!!

 

Any help on this would be great.

[Henk]

David,

 

web page

[Dave Ball]

Glad you found it. Post a sample and I will try to help with the file location line

[The Fastmill]

Hey... Thats Me!!!

 

How do I change all my info... I don't remember my log in info and I don't work there anymore...

[The Fastmill]

I fixed that as well... just took some digging... now it looks like this...

 

code:

---

O0000 (1080377 EDM TOOLING BOTTOM)

(MPMASTER GENERIC 3/4-AXIS VERTICAL)

(MACHINE GROUP-2)

(PROGRAM - 1080377 EDM TOOLING BOTTOM.NC)

(MCX FILE - 1080377 EDM TOOLING.MCX)

(MASTERCAM - X2 MR2 SP1)

(POST PROCESSOR - MPMASTER)

(DATE POSTED - SEP-09-2008)

(TIME POSTED - 8:07 AM)

(PROGRAMMER - DAVID MCCRACKEN)

(>>>>>>>>>>>>>>>>>>>>> TOOL LIST <<<<<<<<<<<<<<<<<<<<<)

(T3 - 1.000 DIA FINISHING ENDMILL - H3 - D3)

(T8 - .250 DIA FINISH ENDMILL - H8 - D8)

(T10 - .250 DIA 90 DEGREE SPOT DRILL - H10)

(T11 - .246 DIA #D DRILL - H11)

(T13 - .252 DIA REAMER - H13)

---

[Dave Ball]