Mori Duravertical 5100

[Mark V.]

It has a MSC-504 Fanuc control. My question is when i load programs into the control and go to the hd-directory is their a way to delete more then one program at a time?

[X-L Engineering Corp]

I have a NV5000 MSX501 control and it in the program list when you press delete there is a button for clear all that should work.

[Dave.L]

Ted, what do you think of the NV5000? The machine looks awesome but when all said and done they are about 200K

 

We have a Mori NL1500SY and it's the best machine we have ever had (that one was about 280K)

 

Thanks,

 

Dave

[Mike S @ S4A]

Ask JP when he's back from the show...I think its one of his faves....I've never been lucky enough to run one

[John13]

quote:

---

Ask JP when he's back from the show...I think its one of his faves...

---

One of his faves, after any Haas of course.

[Mark V.]

quote:

---

when you press delete there is a button for clear all that should work.

---

I am not seeing any clearall button. Right now the programs are listed 1 2 3 4 5 etc. I press 1 then right arrow key then their is an F Delete. That wiil delete program 1. I was hoping their was a way to delete all programs at one time and not go through that 5 times.

[robh]

some fanuc controls allow 1,5 delete and all 1-5 will be gone, on ours programs are O001 etc. so if I want O001,O5000(O0001-O5000) gone for ex. all those will be deleted, do'nt know about yours tho.they get deleted with a button on the keyboard not a soft key below the screen.HTH

[X-L Engineering Corp]

I have 2 NV5000's one I use with a 4 axis head and the other I use with a tilt-rotary 5 axes Their good machines but I also have 2 MC-660VG Matsuura's the same configuration and chip-to-chip I prefer the Matsuura. I also have 2 Robo-Drills that I really like.

This comes from having a couple of issues presently with the Mori's. My 3-year-old Machine I already replaced the Spindle and the "Z" axis ball screw and the 2-year-old machine the "Z" axis ball screw.

They don't make them like they used to I have a couple of 20 year old Mori MV-JR that are still running just fine.

I guess you would call it the luck of the draw?

 

Just my .02

[Hardmill]

We have an NV5000, NH4000, NMV5000 and an

NL2000 along with a hyundai/kia mill/turn.

 

The Moris all kick arse

 

 

PEACE

[Mark V.]

I figured it out its amazing whats in the data server manual. Its *.* file delete execute to delete all programs from the HD-Directory.

[X-L Engineering Corp]

good to no

wander if that works on all the controllers

[Bob_Looney]

HardMill is spot on.

I just sold my NV5000 APC after 5 years.

I fed it aluminum, washed down with coolant. Never touched it. Had a service guy check it all out just before I sold it and it speced out better than when it first hit the floor.

I'm surprised to hear others had problems.