COPY TO LEVEL

[smokey_44]

X3 MU1 - X2 mr2

 

Does anyone else have the same problem , I just want to copy some wireframe stuff to another level , Highlight what you want ,right mouse button click on Level box & copy to level ...when I do this to a blank level it NEVER works. I have noticed that I can COPY when the level I'm coping to have stuff in it already ,but if its a NEW level it NEVER works. I always end up translate zero then MOVE result to new level ....Anyone ? Am I not doing this the right way ?...another way to do it ?

[Rob @ Target Machine]

Select your geometry.

 

Right-click level button.

 

Uncheck "Use Main Level" box.

 

Click select button.

 

Type in new level number and give it a name.

 

Click the green check mark.

 

Choose copy or move.

 

Click green check mark.

 

.

 

 

Works fine for me.

[Justin Beebe at Folsom Tool]

I have never had that problem. It always works fine for me also.

[Thad]

I do this on every single file I create in X2, with no problems.

 

Thad

[FP1]

Works fine here too.