Omitting block numbers in post

[Code_Breaker]

I forgot where to edit post to remove block numbers ...

 

For example:

 

code:

---

 N101 M0

(TOOL #1; 2.0" INSERT 3-FL .062 RAD X EXT 2.0; DIAMETER=2; CORNER RADIUS=0.062)

N102 G54

N103 G0 G17 G40 G80 G90 G94 G98

(FACE TOP TO 1.850 THICKNESS)

N104 G0 G90 X-1.55 Y1.8445 S9000 M3

N105 G43 Z5. T2 H1

N106 M8

N107 Z1.95

N108 G1 Z1.835 F100.

N109 X79.15 F150.

 

---

code:

---

M0

(TOOL #1; 2.0" INSERT 3-FL .062 RAD X EXT 2.0; DIAMETER=2; CORNER RADIUS=0.062)

G54

G0 G17 G40 G80 G90 G94 G98

(FACE TOP TO 1.850 THICKNESS)

G0 G90 X-1.55 Y1.8445 S9000 M3

G43 Z5. T2 H1

M8

Z1.95

G1 Z1.835 F100.

X79.15 F150.

---

[Mark H]

Check the control def, nc output.

 

EDIT:

my understanding is the control def handles this now, but I just checked in one of my posts... its defined as sequence numbers... in the post search for omitseq$

[Code_Breaker]

thanks ...

[gcode]

Its on the NC Output page in the control def..

just uncheck

"Output sequence numbers"

[Joe788]

While we're talking about taking crap out of posts, how the heck do I get the generic 5X post to stop outputting spaces between every thing?

 

This :

code:

---

 ( T19  -  .3125 ENDMILL   )

( RAMP AROUND THREADED BOSS )

T19 M06

G0 G90 G54 X.7228 Y-7.9024 A-90. C0. S12000 M3

Z6. G43 H19 M8

Z.68

G1 Z.48 F75.

G2 Z.415 I-.7228

Z.35 I-.7228

Z.285 I-.7228

X-.6554 Y-8.207 Z.257 I-.7228

---

To this:

 

code:

---

 ( T19  -  .3125 ENDMILL   )

( RAMP AROUND THREADED BOSS )

T19M06

G0G90G54X.7228Y-7.9024A-90.C0.S12000M3

Z6.G43H19M8

Z.68

G1Z.48F75.

G2Z.415I-.7228

Z.35I-.7228

Z.285I-.7228

X-.6554Y-8.207Z.257I-.7228

---

I've searched the post for the work "space", and can't find anything relevant. I've also searched for "omit" and "between" but also no luck.

[gcode]

Same page of the Control Def..(NC Output) There is a place to set the number of spaces.

Right now yours is set to 1, change it to 0

[Joe788]

Ahhh, I see what happened. I've been working on the same program for a week and a half. I had changed that to "0" a week ago, but it still posts spaces. I just created a new file, selected that machine def, threw a toolpath on it, posted it, and I got no spaces. I guess I just need to reload the machine definition to the giant program I've been working on?

[gcode]

quote:

---

I just need to reload the machine definition to the giant program I've been working on?

---

yup