unrecognized entities error X4MU3

[Code_Breaker]

I get this and was wondering if anyone knows how to find these "entities"

 

quote:

---

There were some unrecognized entities creaded by the operation.

---

[gcode]

I've never seen that error..

try unblanking

some toolpaths create blanked enities on the active level then delete them after the op has proccessed..

[Code_Breaker]

I don't have any dirty ops ...

[SAVANT CNC]

Contact your reseller, he/she should be able to help you out...!!!

[Colin Gilchrist]

Were you creating a solid? I've seen that when using Thicken to create a solid. When I tried to toolpath some of the surfaces, the UV directions were all messed up. I had to create edge curves from the solid and build new surfaces...

[Code_Breaker]

quote:

---

Were you creating a solid?

---

no ...

 

It only happens when I open the file ... it was created in X3, but changed to X4 and now to X4MU3 ... no dirty operations and if regen, no problems ... no dirty solid and if regen, again, no problems ...

 

just a pain when opening the file, having to hit enter several times ... I usually put my stapler on the ENTER button and wait ...