Modifiing generic post

[Beardog]

Good morning everyone,

 

Anyway we are trying to figure out what we need to modify in the post to add 50 to all D numbers for a Makino or if it even possible. We really do not want to do it through the MMD because we post out the same program for our Hass.

 

thanks for any help.

[Thad]

From our post (MPFAN)...

 

code:

---

pccdia          #Cutter Compensation

#Force Dxx#

if prv_cc_pos$ <> cc_pos$ & cc_pos$, prv_tloffno$ = c9k

sccomp

if cc_pos$, tloffno$

tloffno$ = t$ + 50

---

Thad

[Beardog]

Awsome Thank Thad i will give it a try

[Guest]

This can be done in the control def too. Add to Diameter on the tools section.

 

hth

[Storkman]

I think I would do it John's way. 2 separate Machine defs, and the post would work correctly for both machines.

[Leigh @ Kodiak]

Yet another way of handling this is to have the post ask the programmer which style to post out. Thats how I do it here.