Fanuc O-M parameter problems

[ScottyB]

So...somehow, someone completely wiped out every parameter in our controller.

We had to manually enter all parameters to get a pulse again. That actually worked better than expected until now.

Normal procedure for getting files DNC is to turn to EDIT and hit INPUT. THen the screen flashes FSK(I think) which indicates it's ready to recieve.

The problem is it doesn't flash anything, therefore it is not in ready mode.

Any idea of which parameters to tweak to address DNC?

 

Thank you.

[Newbeeee™]

Out with the yellow books and

http://www.dncsetup.com/fanucoi.html

 

HTH

[Dave Ball]

Guys if you have Fanuc controlled machines get the Fanuc idocs DVD, I bought it 2 yrs ago and it has saved me many hours & countless headaches. This article is old but it gives you an idea of what is on the DVD.

 

Fanuc i docs

[Chris Rizzo]

What;s the price on that dvd?

[Dave Ball]

Chris if I recall it was around $1100, which is about the same as a complete set of manuals for a single machine

[jeff]

quote:

---

So...somehow, someone completely wiped out every parameter in our controller.

---

Wow that really sucks.

Is it possible that the battrees are no good?

[ScottyB]

Jeff,

Someone decided to trouble shoot by hitting the old school equivelent of Format:C/

 

Could someone check something for me please?

The problem may be in the parameter settings page

I have...

REVX=0

REVY=0

TVON=0

ISO=0

I/O=3

ABS=0

SEQ=0

 

PWE=0

REV4=0

TAPEF-0

PRGNO=0

SEQNO=0

 

these seem wrong for inch, absolute, DNC

 

Thanks

[nine blue]

Found this: http://www.aggsoft.com/cnc-dnc/fanuc-0m.htm

 

It's the setup for Precision DNC software. Might work across different DNC platforms.

 

HTH

[ScottyB]

progress, except that the controller ends the program after the safety program sub routine.