paning/zooming issues

[Greg_J]

When I pan or zoom around my part it is moving with a delay and if I have my model set to translucent it goes crazy with all the surfaces of my solid refreshing.

 

It didn't do this before any ideas? I did update my graphics card driver and nothing changed.

 

Thanks.

Greg

[JDowe]

My computer does the same thing with translucent

set - I dont know why

[Greg_J]

Weird thing is it didn't do it before, only recently.

[CJep]

Greg,

What graphics card are you running?

Do you have the latest driver for that card loaded?

I have been using the drivers tested and recommended by the SWorks tech support and that has worked out fairly well.

 

http://www.solidworks.com/sw/support/videocardtesting.html

 

How "Big" is the file? I have a solid open with shading set to trans and can pan/zoom & dynamically rotate with no issues.

 

Dell Precision M6400

NVidia Quadro FX2700M

[K2csq7]

I have the same issue, just started maybe a week or 2 ago. When zooming with the mouse wheel, it takes a few seconds for mastercam to "catch up", also when deleting entities, the entity kinda stays there until I clear colors or zoom around a bit??

[Verndog]

Nobody with this issue has posted what graphics card or OS they are running. This is important info that is needed to help troubleshoot the issue.

[Greg_J]

xp pro with NVIDIA Quatro FX 3450/4000 sdi. The files range from a few Mb to about 50Mb.

 

I just started a new part and now it's not doing it, it's running normal but if I load that part is gets messed up again.

[K2csq7]

Nvidia Quadro NVS 295

 

The file size has zero influence on my issue, I can start a new file and as soon as I draw a couple lines I see the hesitation.

 

Like I said, it just started a couple weeks ago or less, no updates done to the computer, nothing (that I know of) has changed.

 

Not hard up for a solution, just trying to let people know that I see this issue as well.

[taperlength]

Spyware?

[Greg_J]

Do you think spyware could make that happen?

 

I disable hardware exceleration and that helped.