help w/mc7

[perseid88]

Can I get a hand converting an .mc7 file to either .dxf or something MC Mill X4 can open. I just need the line geometry. We no longer have any machines with MC9 or older on them for me to do this with.

I have uploaded 57585457.mc7 to ftp://www.mastercam-cadcam.com/Mastercam_...verted_from_MC/

If anyone is willing/able to do this conversion for me, you can upload to the FTP or email direct to me at puecker at deltasteel dot com.

[TK-32™]

Have you tried converting to IGES?

[perseid88]

I can't open it. How would I convert it?

[htm01]

its there as a v9

and MCX too now

[Storkman]

Good, I didn't want to dig out the "way back" machine to help him out.

[perseid88]

Thanks so much.

[perseid88]

Those files can now be deleted from the ftp site but I don't think I have the authority to do that. I tried.

[htm01]

quote:

---

Good, I didn't want to dig out the "way back" machine to help him out.

---

i still have V3 on a machine at home.

[perseid88]

When I got a new computer last year about the same time X4 came out, I made the switch and hoped I would not have to look back.

The old computer died with previous versions of MC on it. Only data files were backed up.

[Mark H]

misery loves company... A few other Mastercamers (including myself) have had this issue - unable to open older Mastercam files in the latest version of MC.