New file Format!!

[Rick Damiani]

quote:

---

I would like to know about this Demo copy the instructor gave you.

Does it post out more then say 20 lines and past 2 deciamal?

---

Jay: You can get the demo installer from the extranet. If for some reason you don't have access, e-mail me and I'll get it to you.

[cadcam]

Rick ,I do put the Demo does not post out if you look at what he was saying that is why I asked.

 

The Demo only posts out a few lines not the hole program if his does then there is an issue at hand.

 

How are Rick? see you around soon I hope.

 

Jay

[Rick Damiani]

Degmc: Let me known how it goes when you get a chance. I'm going to be in Sacramento from the 15th to the 18th, and in San Jose for training on the 19th. I can come by if needed.

 

Jay: I installed X2 Demo just to be certain. It posts 20 lines per op @ 2 decimal points, just like expected.

[Mike Annetts]

Hello Hans

 

I teach at a small high school and I share the same concerns that you do with the software. I agree with the new file extenstion-it sucks. We have had NUMEROUS problems with the software and setting up hasps, liitations on some and not others, incorrect codes, hasps timing out when they are not supposed to, etc, etc, etc. I know that we don't count much in the big picture of industry in regards to profit but it would be nice to be able to teach a class full of students without the problmes mentioned above cropping up in he middle of the class, I would absoultely love to have cnc software come into the shop and deal with the problems that crop up due to security concerns.

[Rick Damiani]

Mike:

 

I don't know who your dealer is, but that's the guy you need to get involved in helping you solve your issues.

 

Don't sell your importance in the larger scheme of things short. Single seats of MasterCAM for schools are inexpensive compared to industrial sets, but a school with a lab of MasterCAM pays about as much as a smallish industrial shop does. They they deserve the same level of support.

[Exodus]

Jay, I never actually tried to run a program posted from the mc demo And this was at the beginning of my softmore year, I'm now halfway through my junior year! I don't have it installed anymore, so yeah. Don't worry about it, you know who he is though.

[Will Slota]

Degmc,

 

I believe you have th ewrong HASP code.

 

Please contact our office at 1(800)ASK-MCAM

 

Thanks,

[#Rekd™]

Hi Demgmc,

 

Same thing here...frustrating to say the least..

 

I heard that CNC software was going to address this problem but who knows when????

 

John Ford

[Rick Damiani]

Anyone else having these issues should contact their dealer for a resolution.

[Yogesh K. Raman]

I would like to thank CNC Software, Inc. ( Gary Hargreaves, Will Slota and others I can't recall their names) for their prompt action in resolving the .emcx/.mcx file format issue for our educational customer Universiti Kuala Lumpur. The lecturers are currently successfully running lab exams with MAstercam X for their students.

 

Sorry about the confusion on our side.