t/c planes

[HEAVY METAL]

i want to do some work on bottom of part.so i have changed wcs to bottom and my cplane tplane and gview are all set with this view.james had said something about being able to verify the complete part top and bottom. without playing with stl files. when i verify the top of part looks good but the bottom is not verifying correctly.i think need to set a new origin in the z for the bottom toolpaths but this option is dimmed. can this work or am i dream'in

 

thanks heavy

[Trevor Bailey]

You just need to set your stock for your first operation that encapsizes your entire part. In verify, "use job set up" and all will show correctly.

[perfecseal mankato]

I use the new wcs system all the time for top and

bottom work.

Your problem may be in the verification settings themselves. It will not work in turbo mode at all.

Then use wireframe tool.

Make sure the wcs, tplane, and gview are not at new wcs view. Also, regen the drawing before verification.

Hope this helps.