Back to the land of the employed again

[Jim Whipple]

Hi all

I'm employed again working in a model shop in Seattle using V7. At least it ain't Gibbs!!

We are working with our reseller to upgrade two seats of level 3 and one of entry lathe to V9. I can't wait!!

We do a lot of fourth axis stuff on Cincinnati's and I get to clean up a lot of housekeeping issues left from the previous programmer.

One question I have is ... We have a Star Micronics swiss machine 7(I think) axis.

Does MC have a product for this sort of application??? I've never heard that they did but...

 

Great to be back

Jim

[Guest CNC Apps Guy 1]

Well Jim,

 

You'll be in luck soon, talk to your reseller about it.

[Tony]

Welcome back Jim

Does Knowing MC pull its weight

in this Biz or what !

 

[ 03-06-2003, 09:52 PM: Message edited by: Tony ]

[Surface]

I'm glad you found a new job. The 9 to 5 stresses are nothing compared to the insecurity and stress that unemployment can cause. It sounds like a nice new home and a good match for your talents as well as a place for you to learn and expand your knowlege. Congrats

[iowajim62]

Hi Jim,

Welcome back to the land of Mastercam !!!

Congrats on the new toys to play with.

Good Luck !

[MACHINEMASTERG]

welcome to the work week in this mounths tooling and prodution magazine they show mastercams version of swiss tool programming cam system its still in the works but looks pretty good try here and see if its on there web site yet just got this magazine today...www.toolingandproduction .com