pecking without using cannned cycle

[HEAVY METAL]

My machine does not support canned peck cycle

my code looks like following for a peck cycle.Does anyone no how to make the r value read the peck clearance value in the cycle params so it

rapid down to this value

N0001G80R0

N0002X+182500Y-7500

N0003G79Z-1500F75

N0004G80R0

N0005G79Z-3000

N0006G80R0

N0007G79Z-4500

N0008G80R0

 

 

thanks in advance heavy

[chris m]

Hey Heavy

 

Ask the boss to buy a machine from this century, man

 

C

[ROB]

sorry but, this is funny!

[HEAVY METAL]

Easy now we have plenty of good machines that are only a few years old as well as a robot work cell that runs 3 edms and a graphite mill.

[Fred from Université de Sherbrooke]

If you go in the post, search for usecanpeck and set it to no. You'll have longhand codes.

[cadcam]

Thanks Fred I was going to post about that.

I just remeberd and there it was. From you all ready.

[HEAVY METAL]

THAT IS HOW I GOT THE CODE IN THE EXAMPLE BUT IT IS NOT EXACTLY WHAT I WANT

 

 

H.M.

[Fred from Université de Sherbrooke]

Humm,

You will need some post work. Do you think your Mastercam dealer can help you on this?

It would be worth the $$$