CNC Programm to valberty CNC machine

[goodmill]

I will put a CNC Programm to a Valberty CNC machine, but its very specialy to do !

 

How can help me to find the right way to copy a Iso File on Valberty Control with CNC 90 ?

 

Thanks

[#Rekd™]

Hi Goodmill,

 

Not to sure what you are asking but do you have a post for this machine?

 

John

[goodmill]

HI John

 

Yes i have a post for this machine, and i try to milling this programm on the machine; but its very specialy to bring this programm on machine while the interface works with a Floppy disk and on this disk it needs specialy registers and a special File named "indice.prg".

 

Do you know the right way to do this ?

 

Thanks Goodmill

[#Rekd™]

Hi Goodmill,

 

Sorry I do not. Try posting in the other forums and somebody will help you.

 

John

[riversail]

Hi Goodmill,

 

Say detail?

 

According to what you say, Yes,Try posting in the other forums and somebody will help you.

[goodmill]

HI riversail

 

i think nobody works with this machine !!! I have post in many other forum but no answer !

 

the problem is that the machine have a specialy file named indice.prg and this is a converter i think, but it is in binary

 

goodmill

[Jimmy Wakeford from Barefoot CNC]

Have your dealer check with cnc software, I remember one that someone had worked on.

[goodmill]

Last try

 

Nobody who knows somewhere who knows with extern files with a valberty machine control cnc90 dos based ?

[BlackOnyx]

A quick search and I am finding Alberti CNC machines, and I wonder if you should be looking for this? Machines made by V.alberti (Vittorio Alberti).

A Google for cnc-90+valberti gets 196 hits.

A Google for cnc-90+alberti gets 2660 hits.

Hope this might help your search - Good luck!