5 AXIS POST HELP

[Rekd™]

quote:

---

Any Ways, this hole thing has been a test to see what people on this board realy knew.

---

Such a lame attempt to try to backstep. The only one you're fooling is yourself. Pity the fool that doesn't look in the mirror every day.

 

You don't appear to be completely stupid, athough your posts would lead most to believe that you are. It's blatently obvious that you're childish and insecure. I don't know if you want people to percieve you like that or what, but we do.

 

quote:

---

that makes me special.

---

Yeah, you rode the short yellow bus to school, didn't you? It shows.

 

It's always a good laugh to see some poor fool come here and make him/herself look like a complete moron. Although some of your posts were very funny, I must admit this last one was the best I've seen in months. It so amazes me when someone believes they can recount all the errors with one simple statement; "Any Ways, this hole thing has been a test to see what people on this board realy knew. "

 

'Rekd teh Adds Squatting Dipsh!t to the ignore list...

 

[ 05-08-2003, 08:34 AM: Message edited by: Rekd ]

[chris m]

quote:

---

Pity the fool that doesn't look in the mirror every day

---

'Rekd teh 'Mr. T was my hero'

[Allan]

SquattingDragonHiddenEmailAllcapsPostSeeker

 

Check here for free 5 axis posts

 

Thanks for reading the FAQ

[Guest]

Allan:

 

ROTFLMAO Twice

 

[ 05-08-2003, 06:47 PM: Message edited by: Marc Lindsey at San Diego CAD CAM ]

[P_Scott]

Fire Dragon,

 

I was entertained like most after reading many of the posts here. I started to read this topic because I knew that there would be a flame war due to the very words of the topic title. There is one thing you said that I take offense to.

quote:

---

By the way, speaking with your local MasterCam dealer about a post is like asking your four year old how to change a tire.

These guys are sales man nothing more.

---

I work for a reseller who could be described as one of the best post processor experts in this country and does 5-axis posts on a regular basis for those of our clients that need it. In fact he's talking to one of our clients at this time about a 5-axis post for their Mazak Integrex. Everyone in our office, with the exception of the office manager, has experience programming, setting-up, running and communicating with CNC machine tools in other companies. The total number of years of experience for all 5 of us in a manufacturing environment is somewhere near a half a century. Not all resellers are salesmen. Many also read this forum on a regular basis. It seems you've just earned your seat of Catia. I hope you like it. Try not to let the door hit you on the way out. "D'Oh!!"

 

[ 05-09-2003, 09:00 AM: Message edited by: Peter Scott ]

[Toolfab]

LMAO @ ALlen

 

Grinning from ear to ear at 8:00am!!

 

[Bullines]

To add to Peter Scott's post...

 

eMastercam is operated by a Mastercam reseller. [sarcasm]I hope we never get a flat or we're screwed.[/sarcasm]

 

RedDragon, how many more items of the forum guidelines will you disrespect?

 

*Bullines' right index finger is just itchin' to click the ban button

[Noel]

Peter

I wish all resellers had the experience that you guys have.As there have been many times I've had to either figure it out myself or since I've discovered the forum ask the members for help.I am within spitting distance of In House Solutions but because the bossman went with a different reseller I do not have access the the experts at In House.I do however in no way agree with squating dragon hiden email thinks he knows everything.Keep up the good work.

 

 

Noel

[heeler]

Our reseller has always been very helpful in finding out solutions, If he didn't know he would either find out for us, or help get us to someone who could. This forum is also very good for solutions.

[chris m]

S4A Rocks!

 

Hey Peter, tell Standley to push that piece of s**t out the door; then they won't have to pay Steve for the post.

 

Bullines, go for it; this clown can say "hi" to Multax for us

 

C

[Nominal]

How do you spell psychosis?

[Rekd™]

quote:

---

Bullines' right index finger is just itchin' to click the ban button

---

'Rekd teh Sneeking up behind bullines and jabbing him (lovingly) in the ribs

[McRae]

quote:

---

I know that it is a tough decision to put your email address up – I get close to 50 emails a day for xxxx enlargement and Viagra

---

Jack,

 

Did you order both?

 

Rek'd, James and the rest - Relax, perhaps this guy may really know something. Anyway, I am having fun seein ghte reactions you are posting.

 

It would be even funnier if this guy comes out as Libral Democrat 5Ax Catia User that Loves CLData rather than NCI.

[Rekd™]

quote:

---

perhaps this guy may really know something

---

That's besides the point now. I don't care what he knows. He is, IMO, an a$$hole, and that negates any knowledge and/or contributions he could make.

 

He's even beyond a sincere "I'm sorry for being an xxxx", which would be appropriate reguardless..

 

'Rekd teh Still Bonkin' Bozos

[Guest CNC Apps Guy 1]

This guy MUST be related to Multass. He talks way too much trash to be effective at anything besides spraying flame.

 

So Mr. Fire Breather, why don't you go play in your alt.binaries NG some more and keep asking for the latest CATIA and IMS Post cracks.

 

OUT!

[P_Scott]

Chris,

 

Thanks for the plug. I'll be sure to pass that message along. BTW. If you look closely on our new website, you just may see your picture in the Services section. Check it Out S4A new site

[chris m]

Wow, the side of my head is on the internet; I'm famous!

[Jack Mitchell]

Andrew,

quote:

---

Did you order both?

---

This will definitely cost you one round of Guiness – and I’ll take it warm, just as I’m as sure you will also.

 

I really wish that dragon would come back with a response. I don't think that he will but what the heck - I'm sure he stirred the pot anyways and that the forum in general had an opportunity to let off some steam.

 

How's that for a closeout hey Bucket?

 

 

Regards, Jack

[McRae]

Allan,

 

Finally downloaded your link - I sure needed the laugh...