Tool Libraries

[dannysdad]

Is it possible to create a new tool library by importing tools from the tool libraries installed in Mastercam?

 

I am going to have 5 new Mazaks, each with a 160 tool hive and they will for the most part have different tool configurations. I would like to have a different library for each machine. I can use the stock tools in the libraries that came with MC, (with a little editing), but I can't figure out how to move the tools from one library to one that I created.

 

Thanks

[?Mark]

Copy/paste tools between libraries, copy and rename libraries... Many different ways of doing it.

hth

[Kevin M @In-House Solutions]

Go in toolpath/tool manager

 

in the bottom open your tool library

select the tools you want to copy and move them up using the arrows

click on the create a new tool library button and use the arrows on the side again to transfer the tools back down