The maximum spindle speed

[hle4682]

In mastercam

Why not set the spindle speed of more than 50,000

[Teh Bear without Brains kinda idiot]

go ahead.

In machine tool definitions in tool spindel group change set the maximum spindel spead to anything you like (1 zillion rpm)

 

~~~~~~~~~~~~~~~

From MC help

Minimum/maximum spindle speeds

 

The spindle speeds are used to limit the spindle speed set in the Toolpath parameters tab for an operation.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

HTH

[K2csq7]

In mastercam

Why not set the spindle speed of more than 50,000

 

 

#1 reason = safety

 

In lathe when your using CSS and you want to limit the RPM as the tool approaches center...

 

I have mine set to 80 If you want more you ask me & I check ur setup!

[hle4682]

in milling ???

[K2csq7]

I wouldn't want to run a 8" face mill at 20K...

 

SAFETY!!!

[hle4682]

go ahead.

In machine tool definitions in tool spindel group change set the maximum spindel spead to anything you like (1 zillion rpm)

 

~~~~~~~~~~~~~~~

From MC help

Minimum/maximum spindle speeds

 

The spindle speeds are used to limit the spindle speed set in the Toolpath parameters tab for an operation.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

HTH

 

 

Thank you for your valuable comments

[hle4682]

I wouldn't want to run a 8" face mill at 20K...

 

SAFETY!!!

 

 

Thank you for your valuable comments

[[email protected]]

Thank you for your valuable comments

 

You could go elsewhere if you don't like the help you're recieving here :rolleyes: :rolleyes:

[Redfire427]

It also has to do with switching a job from one machine to another. If a programmer is programming a part for a machine that has a 30K spindle and that machine is not available, however, another machine with a 15K spindle is available, when you change your machine definition so that you post out the correct code, the toolpaths that were programmed to an rpm that exceeds the capability of the machine you are now using will be flagged. You will have to update the speed and feed of the toolpaths that exceed the 15K limit.

 

Carmen

[Colin Gilchrist]

In mastercam

Why not set the spindle speed of more than 50,000

 

What are you asking? Do you want to increase the maximum spindle speed amount to a higher value?

 

You can set the Minimum and Maximum value for the machine inside the Machine Definition Manager. Right-Click on your Tool Spindle component, and set your Minimum and Maximum allowable speed there. If you try to set a value that is lower or higher than those values in an Operation, Mastercam will display a warning and set your value to the Maximum allowed in your Machine Definition.

[hle4682]

What are you asking? Do you want to increase the maximum spindle speed amount to a higher value?

 

You can set the Minimum and Maximum value for the machine inside the Machine Definition Manager. Right-Click on your Tool Spindle component, and set your Minimum and Maximum allowable speed there. If you try to set a value that is lower or higher than those values in an Operation, Mastercam will display a warning and set your value to the Maximum allowed in your Machine Definition.

 

 

Thank you very much, helped me free up

[Teh Bear without Brains kinda idiot]

hle4682

Do You need to be talked twice any time you asking for ?