Looking for an OLD post processor

[Camgal_59]

[not sure this is the correct area to post this question!!]

 

Does anyone have a post processor for a Mazak lathe using MasterCam version 9.1?

 

Before you start on me!!!

 

1) Yes, my maintenance is up to date.

 

2) Yes, I've asked my MC seller. They do not support version 9.1.

 

3) Yes, I have access to the latest MasterCam ... but .. NO .. I'd rather not be using it.

 

So, with that all said, does anyone have an old Mazak Post in their archives?

[gcode]

did you look on the V9 install disc.. I think there is one there, though I have no idea

 

if its any good

[CJep]

Jo,

I PM'd ya

[mayday]

closest I have is for a Mori SL45 from V9. standard Fanuc output

[Camgal_59]

Thanks G!

 

I never thought of checking the disc. Will have to dig it out .. if I can find it.

 

That version was bought before my time here! Not even sure if it is on a CD ..!

 

Thanks CJep .. I PM'ed ya back!

[bigjohn]

I have a large collection of oldies, V8 and V9. I'll find a PC with a floppy drive to read the disks first.

 

I'll get back to you

 

John

[bigjohn]

Camgal_59

 

Mate, you've got mail.

[Camgal_59]

Thanks Big John!!

 

To all .. I now have a few post processors to try thanks to forum members!

 

Now, I just have to get juice to the lathe so we can try a few programs.

The person in charge of this is procrastinating .. so that may take a while.

 

Thanks again for the help!!