1/2" Ball Nose cutter with Thru-Coolant needed.

[danielm]

I'm having a hard time finding this little guy. Likethe title says, I need 1/2" ball with thru coolant. I prefer insert but solid carbide would work.

[guyw001]

How about this?:

 

http://www.ekstromcarlson.com/index.cfm/category/281/ec094-carbide-coolant-thru-ballnose-mill.cfm

[danielm]

How about this?:

 

http://www.ekstromcarlson.com/index.cfm/category/281/ec094-carbide-coolant-thru-ballnose-mill.cfm

 

 

Thanks for the lead. I Called em. They only have 2 flute solid carbide and no insertables. Mitsubishi has what I need but not for another month.

 

http://www.mitsubishicarbide.com/mmc/en/product/pdf/b/b020g.pdf

 

The 5/8" Dia should do fine.

[crazy^millman]

Look at Seco they have some different things that might work.

 

HTH

[Pilot Plant Supervisor]

I am using Ingersoll part# 1BW7T-0501778R01.

[Thoob]

May I ask what you need the through coolant for? Can you use air blast? What material are you cutting?

[Thoob]

http://www.dapra.com/cutting/ballnose/tools.htm

 

 

Thru-Coolant Cutter Bodies have been removed from our product line, providing you with a more solid cutting tool yielding maximum rigidity. Customers requiring thru-coolant tooling can still receive this option, but on an "upon request" basis only.