Containing a 5-axis toolpath

[melliott6]

mastercam x6 mu2

 

I am milling some pockets in a part that need 5 axis rotation and I used the parallel to multiple curves toolpath to finish the walls with a .750 cutter, the corners of the pocket are .260 and I want to come back with the same toolpath using a .500 cutter and finish the corners only. I cant find an option for containment on this toolpath, so I can isolate the corners only. Is there one hidden behind a checkbox? (im in the advanced interface)

 

Thanks in advance

[RObert TImby]

Copy your geometry ( lines, arcs and splines ) as needed trim what you don't want and copy your toolpath op and replace the tool and the chain. regenerate it and call it done

[cobra95kev]

Or leave your geo alone and use containment boundary.

[RObert TImby]

True, never thought about that one

[melliott6]

I cant find an option for containment on this toolpath, so I can isolate the corners only. Where is it at? How do you conatin?

[cobra95kev]

You need to be in the full "advanced" interface for it to show up.