operations mgr. docking

[TERRYH]

I use two monitors and like my op. mgr. to be on other screen. in x4 when I did this it stayed that way but so far in x6 it is always back on main screen docked to MCX but the lvl mgr stays on second monitor where I put it what do I do to make it stay on second screen wher eI want it to be?

[Jayson Kramer]

Mine works as you want. try setting it up then save a new toolbar state with a new name set as default and see if this helps.

[TERRYH]

That worked thanks

[TERRYH]

Heres another oper mgr question, when looking at the op mgr and the actual programs you have greated they list in order program type, parameters, tool description geometry, toolpath size and name, then coolant. I have in the last few weeks switched to X6 from X4 in X4 it did not show the coolant at the bottom so is there a way to change this so the coolant does not show?

[Chris In-House Solutions]

Showing the coolant in the Op manager was a added feature to X6. The nice thing is if you click on coolant it is supposed to take you directly to the coolant page. So if you forgot to turn it on you can just click on coolant and go there.

[TERRYH]

We do not turn the coolant on when we program if the operators want to use it they turn it on manually at the machines. We do alot of dry cutting and also use air sometimes.

[K2csq7]

Hi Terry,

Try right clicking in the operations manager, then click on display options.

[TERRYH]

That worked thanks