problems error to transform G-code from mastercam mill V8 to NC machine

[ARIF]

Hello, I am the first users from indonesian and interested for this forum because I dont know to get userfriends in Indonesia. Please give me easyway to solution problems to transform G-code from file dwg in autocad to mastercam mill V8 for NC operational machine.

 

Many thank's. [email protected]

[Hardmill]

If i'm reading correctly you want to read in a

autocad drawing and create g-code. Is that right.

OH, Welcome to the forum.

 

PEACE

[Lars Christensen]

Hi Arif,

You should be abel to go to File-Convert-Acad.

Then choose the .dwg file and it will apear on the screen, and then take it from there.

BUT, be aware you might loose some doing the translation, like lines circels. I have one costumer were the company logo always ends up 10 times bigger and is always right on top on the drawing. A good idea is to also request a print made directly from Autocad, so you can double check the Cad file.

And offcourse welcome to the forum, I have onely been on the forum a month, and these guys are the best.

Thanks guys.

 

Lars

Sorry about the spelling, was thinking of writting it in danish and send it to a transleter, but they want $50.

[crazy^millman]

Well Welcome to the forum and yes it has been stated to you correct in the way to do it.

 

Lars go to this link it is free. Translate for free.

 

Crazy Millman

[Lars Christensen]

Hi Millman,

 

I do not believe they support danish, onely about

5 million speaking it.

 

but thanks anyways

[crazy^millman]

Well Lars say Dutch to English so I dont know is that Danish? I thought that the Dutch spoke Danish sorry about that.

 

Crazy Millman

[Lars Christensen]

Millman,

Danish is spoken in a small country called Denmark, it is a part of Scandinavien, right above germany and surounded

Dutch is Nederland, you know, Amsterdam, hookers in the windows and hashbars. If any from Amsterdam is reading this, I have been in your city a couble of times, and it is a very butifull

 

Lars

[Nominal]

quote:

---

Amsterdam, hookers in the windows and hashbars.

---

Scheduling my vacation.