X7 Verify problem

[MIKO ELLO]

I am using X7 and I loaded a part that was programmed from X6.

 

Everything was working great and then out of nowhere, my Verify started going beserk.

 

When I verify, the order of the program is not correct and its chopping up my model during verify.

 

Is anyone having this problem? I know the program and everything is correct and I can probably run the part on my machine but like I was saying its not showing correctly in verify.

 

Is there a place in Verify where I can change setting such as stock size and I would like to see if it is set to verify in TOP.

 

Was working great and then it just stopped. I have restarted and it still does not fix the problem.

[MIKO ELLO]

I shut down Mastercam and now when I verify the stock is not being removed but everything is checked off. Am I missing something?

[MIKO ELLO]

I am programming using more than 1 work offset (G54 and G55) through "transform by coordinate"

 

I wonder if this is throwing it off

[gcode]

At the top of the operations manager , there is a white icon , between the Verify button and the G1 button

Use that to set you stock BEFORE you launch verify

[MIKO ELLO]

Okay, I was able to find that and I am still having issues

 

 

The first part should look like 1st pic

 

The remaining pics are what I end up with in verify

 

I posted the code and it comes out fine on the machine

 

Half way through the verify, it turns the tools upside down and starts cutting the part from the opposite of the Top plane.

 

It was fine and then it just started doing this without any changes.

 

 

"]http://[/url]

[MIKO ELLO]

"]http://[/url]

[MIKO ELLO]

"]http://[/url]

[MIKO ELLO]

the part looks good in verify up to this point

 

"]http://[/url]

[Rstewart]

http://www.emastercam.com/board/index.php?showtopic=72837

[Don LePore from CNC Software]

Miko, please forward the part in question to me and I'll take a look at it.

[MIKO ELLO]

Don,

 

Can you send me your email so I can forward it to you?

 

Thanks

Michael