Shallow and Restmill

[Platinum]

I'm having a problem with locked Shallow and Restmill toolpaths. When I file/get a job with locked toolpaths, I lose the actual paths. Nearly everytime with Shallow and somewhat haphazardly with Restmill toolpaths. I have to do a full toolpath regenerate before I can post. Am I just lucky here, or what?

[Hardmill]

I have'nt seen this before.

Do a search to see if anything else comes up.

 

PEACE

[Platinum]

No luck with a search. Luck, unlike the Force, is with me.

[Hardmill]

Are you editing your toolpaths?

Is that the reason for locking the op.?

 

PEACE

[Platinum]

I didn't edit this time, thinking that was the problem previously. I did filter, though. Your time and patience is much appreciated.

[Platinum]

My problem is gone!

That will teach me to NOT push all the buttons and click all the boxes.

Next time, if there is an option to try, I'm trying it!

 

Thanks for the help.

I was missing a tolerance parameter in the restmill and "manually" filtering my toolpath. By using the built-in filter (duh) the problem was solved.

[Müřlıń®]

I have found when I run the filter on an ops that I have already run the filter on, it will lock the NCI....

 

 

Murlin

[Fig sign]

Murlin !

 

quote:

---

I have found when I run the filter on an ops that I have already run the filter on, it will lock the NCI....

---

I told you about this before !