Verify closing error

[k turk]

I'm using X7 SP2. As of a couple of days ago, when closing out the Verify window the simulation will disappear but the Verify window will not close out. You can minimize it or reopen the window and it will appear except with no part. If in Mastercam you attempt to verify another toolpath an error message appears (see attached) requiring a restart of the program. Essentially you are down to a one verification per session of Mastercam. Any help out there?

 

Thanks

kturk

[oneyankfan1]

You might refer to this post http://www.emastercam.com/board/index.php?showtopic=75645 it seems to work with a few different problems with the simulator

[Glenn Bouman]

I got this same error at 2 customers today.

 

Just delete this folder.

 

C:\Users\user.name\AppData\Local\CNC_Software,_Inc

 

To get to this folder you need to turn on show all files in folder options.

[k turk]

Awesome. Thank you. Why did that folder cause trouble? It has an origination of August last year which might correspond with my X7 install. If it has been there all along why cause trouble now?

 

k.

[Product Manager CNC Software]

Those directories are used as default window size and locations for the simulator window. They may have been there a long while, but unless the system needed to revert to the default location for some reason, they would never have been used. Any corruption or bad values in these files could cause the problem.