Tool number change doesn't post 25 % of the time ?

[Fred @ Slate Industries]

Hi Guy's

Sadly I cant use Tools #'s sequentially

 

I have to run through the Machines tool magazines and see what's available.

So my MC Tool #'s right out of the gate are Whacked out .

When I finally change them before I post

The look great in MC and don't show up in the posted Code !?!

Even 1 solo operation and a solo 2D toolpath.

 

Am I doing something wrong?

 

 

Thanks !

Tony

[Guess_who]

Regen the operations even though that don't go dirty.

 

I had similar issue with X7, changing tool information and the operation that used the tool never went dirty so I didn't regen it.

 

Try regenerating the operation.

[crazy^millman]

Regen the operations even though that don't go dirty.

 

I had similar issue with X7, changing tool information and the operation that used the tool never went dirty so I didn't regen it.

 

Try regenerating the operation.

 

Yes I even do this for workoffsets as well. Anything I do I Regen the operations been one of those cannot put your finger on thing since X came about. Some releease seem better than others and I just got in the habit of Regen and didn't have to worry about keeping track which one was acting better or which one was acting worse.

[Fred @ Slate Industries]

Thank You !!