x7 Mu1 verify and compare not showing minus stock condition.

[Millertime]

Using x7 mu1 to program this plate. Cleared out channel with op9 going -.010 p/s . Ran verify on it and does not show red on the compare? A little worried about not being able to catch a gouge if verify compare is not working properly.Anybody run into this? Also if you delete all ops except for op9 and run verify it will compare properly. I attached a screen shot and the file. Let me know what you guys think.

 

Thanks!!!

BAD VERIFY.MCX-7

[CamMan1]

Actually you have minus .050 on those channels but that was probably you trying to overemphasize the cut to see it in verify. Make sure you are running the 5-axis engine 1st it will give a much better quality. Then accurate zoom that area and then compare. It should be much better. You might want to turn on collision checking also.

[Ben Wood]

It works if you change it to the 5 axis engine. The setting is in options under the file menu. Kind of scary that it didn't work with the 3 axis engine.

[Product Manager CNC Software]

Robert, Looks like a bug in the 3 axis engine. I logged it as D-13699 and we will fix it as soon as possible.