decimal in post

[Lars Christensen]

Ok I am back to my old project of trying to edit a post for one of my co-workers, after I saw him sitting today and editing a post manullay for over a hour.

this is for a kitamura mycenter (fanuc).

When the post outputs a dwell its making a decimal after the number..............he wants that out. I can not figure out how the post is deciding to use those.

 

Lars

[Guest CNC Apps Guy 1]

Ok Lars,

 

File, Edit, Post,

 

Replace this;

code:

---

fmt  P  11  dwell       #Dwell

---

with this;

code:

---

fmt  P  4   dwell       #Dwell

---

... and that should do it.

 

HTH

 

[ 10-15-2003, 02:43 AM: Message edited by: James Meyette ]

[PBpaul]

James:

Took you 6 min. Dang you're good.

PBpaul

[McRae]

quote:

---

James:

Took you 6 min. Dang you're good

---

4-1/2 of those minutes were spent proof reading for spelling and grammer mistakes

 

J/K James...

[Guest CNC Apps Guy 1]

quote:

---

4-1/2 of those minutes were spent proof reading for spelling and grammer mistakes

---

Why Andrew, have you been spying on me again??? ROFL!!!

 

WHen matters of posts are concernd I do try to spell correctly as it is of the utmost importance.

 

[ 10-15-2003, 10:30 AM: Message edited by: James Meyette ]

[Lars Christensen]

Thanks James,

Another problem solved......ah.......life is good

 

 

Lars

[gms1]

My question is where can I look up these values myself? Is this in a post help book somwhere? I would like to look up all the variables for the fmt statements.

 

Greg

[crazy^millman]

Yep Contact the dealer and they will send you a post Cd at a very low cost.

 

Crazy Millman