G206, Okuma OSP300 control

[gcode]

Does anyone one know what G206 is on an Okuma OSP-300 control?

We are working up a post for our new Okuma 5X VTM.

We're starting with a proven Okuma multus post for an OSP-200 control

So far it's working pretty well, but the post is outputting a G206 during

B axis angular head motion. The control doesn't like it and alarms out.

[The Cathedral]

My books say:

 

G206 - G code Macro Function Call

[gcode]

That makes sense.. this machine does not have that macro, thus an alarm

thanks

[Mick]

Hmm, I believe our Multus post had the option of outputting a G206. I either switched it off, or wrote it out.

[YoDoug®]

There are a few different tool change macros for the Okuma Multus. It is probably set for one of those. If you need one send me a PM

[gcode]

We just dropped it out of the posted code, so far so good