Spotting & drilling down inside

[Mgrenier]

Stoney,

 

On the Linking parameters page, under the Clearance button, there is a check box that says: Use clearance only at the start and end of operation.  Make sure that this box in unchecked.  If it is checked you will always get a G99 otherwise you get a G98.

 

JM2C

[MikronGuy]

micron guy,you know what im trying to get,ill try what you suggest.can you give an example of what the G codes will look like?

this is a quick code at those values feed and speed incorrect

 

T77 M6

G0 G90 G54 X5. Y30. S1577 M3

G43 H77 Z1.

M8

G98 G83 Z-1.25 R-.59 Q.1 F4.

G80

M9

G91 G28 Z0. M5

[Guyinthedesert]

this is a quick code at those values feed and speed incorrect

 

T77 M6

G0 G90 G54 X5. Y30. S1577 M3

G43 H77 Z1.

M8

G98 G83 Z-1.25 R-.59 Q.1 F4.

G80

M9

G91 G28 Z0. M5

That looks correct. Is it not doing what you want?