X8 verification crash.

[odessa]

Good Morning , Everybody.

I started to use X8 and have a big problem. When I try to verify my tool path, I am always getting crash  without any exception. Does somebody have the same problem?

[crazy^millman]

Look at the topic dogleg or false crashes and see if that applies to your problem.

 

http://www.emastercam.com/board/topic/75105-how-to-address-dog-leg-rapids-in-the-x7-verify-or-why-does-verify-show-gouges-that-arent-there/

[rsbeadle]

tool crash or software crash?

[odessa]

That is I have with verification. 

[crazy^millman]

Need to get on the phone to your dealer and get that one addressed right now.

 

HTH

[odessa]

I've it done. Now I am waiting to long.

[crazy^millman]

Did it ever work? Do you have admin rights on the computer? What OS and what is your video card along with RAM for the Computer? Sorry to ask but this is a 64bit system correct?

[Rstewart]

Turn Off the Customer Feedback.

[odessa]

It worked but if I need to create 8 or 9 ops to make a part, it stops to work after op3 or 4. It works perfect and very fast if I create additional solid file as a verification file. I use video card recommended by emastercam forum.

I have an admin rights. I have Win 7 64bit.

[odessa]

I still hope to get some help.