COOLANT POSITIONS

[mirek1017]

Hi everyone!!!!

 

can anyone help me with my postproprocesor, I would like to change a few things

N14 ( LTR. Y CARBIDE  DRILL   T14 , D14 , H14 , ACT DIA.= .404 )G0 G90 G54 X-1.3756 Y5.1339 S2250 M3G43 H14 Z2.M88G98 G81 Z-2.0718 R.1 F14.X1.3756 Y-5.1339G0M9M5G91 G28 Z0.G28 Y0.M30

1.I would like to have speed in the next line

2.does not generate me M89 a s it should be and coolent M89  have in earlier line

 

AS BELOW:

G0 G90 G54 X-1.3756 Y5.1339S2250 M3G43 H14 Z2.M88G98 G81 Z-2.0718 R.1 F14.X1.3756 Y-5.1339G0 Z2. M89M5G91 G28 Z0.G28 Y0.M30

THANK YOU FOR ALL ANSWERS

 

 

 

 

 

 

[JoshC]

What is the reason you dont have your mastercam reseller assist with the post modifications? Dont get me wrong these forems are GREAT and its awesome to modify and make changes to our own stuff, but theres some complex language inside the post processors and some things i think are best left to the professionals at your reseller who make changes liek this every day and know exactly what to look for. Either way I wish you the best of luck with your posts but wanted to make sure you were aware that your Mastercam reseller should be able to assist in these areas as well.

[mirek1017]

 I WAITING FOR EMAIL FROM THEM    ALL DAY AND   NOTHING.TIME CHANGE RESELLER

 

THANKS

[mikenaturalice]

 

Have you tried under general machine parameters? I think to use the custom codes you have to enable or disable the top left check box.

 

And/or you need to change it in your post processor. Sorry I can't be more help, I do so little with the post processors I can't tell you exactly what you need to do.