Turning a part around in a lathe

[allsys3]

How would you turn around my part in a lathe and still be able to use stock verify for both ends? Thanks in Advance

[BenK]

There is the option for lathe stock flip. That will give you what you need.

[allsys3]

Where would I find t
his option

[JoshC]

the stock flip is found under toolpaths --> misc ops --> stock flip.

[JoshC]

heres a video i had done a while back on how it works. https://www.dropbox.com/s/5d2w4f3d3kupri0/lathe%20stock%20flip%20-%20x9.mp4?dl=0

[allsys3]

you know when you're milling and you change to a different WCS and all the tools and everything switch relative to this new WCS...when I try to do the same on the lathe it seems I create a new WCS but the tools don't seem to change relative to the new WCS. Is there something I'm missing in order to achieve this? Thanks in advance

[allsys3]

Thanks Josh...Exactly what I was looking for..Much appreciated.