Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Need help selecting dual monitor computer system


Stephen
 Share

Recommended Posts

 

Hello,

I need to get about 15 computers for my schools computer lab. Specifying computers is not my forte. I would like dual 23" monitors and a desktop system. It needs to run MasterCAM, Solidworks, Rhino, and CorelDraw. Should I use a vendor like Dell or? I do need to have them in my possession by the end of this month due to end of year budget spending requirements.

Any help would be appreciated,

Steve

Link to comment
Share on other sites

I'd use cyberpowerpc.com for that and the more you buy the better deal you can get.

I just ordered another computer for work myself.  The newest i7 as of 06/08/2017, x199 mb, 2 ssd, 2 hdd, liquid cooled, 32gb ram, gullwing case, 2 monitors, mouse, keyboard and free shipping.  All for just over $2100.  I was going to build it myself (basically same rig) but I couldn't even buy just the parts for that.  I'm sure you don't want to invest that kind of money but could get acceptable rigs in the $1000 range.  I'd call them, how many are you looking to buy?  If you want I'll spec you out a decent rig and send you the build number.  I mean, you don't need all the bells and whistlses.

I've used them before and had good luck.  I am going back to them since I'm getting a desktop this time.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...