Kernel Interface Error

[AJP]

I get this error, sometimes after running verify. It locks up MasterCam and I have to open the Task manager on the PC to shut MasterCam down and restart it. Does anyone have an idea on the cause? Any help would be greatly appreciated.

 

[nickbe10]

50 minutes ago, AJP said:

Does anyone have an idea on the cause?

Usually see this when creating solids and the system doesn't like what you are doing. Do you have multiple solids selected for verify?

 

[AJP]

Just using one solid. This happens intermittently. 

[crazy^millman]

Make the solid a stock model and use the stock model for Verify.

[Justin Beebe at Folsom Tool]

I sometimes get the same error message when using verify and have to go through the same procedure.  I believe it started happening with windows 10.

 

[motor-vater]

I see this almost Daley. I seem to live in verify It also zooms way out. My work around has been to move my mouse courser up to the save icon then keep hitting enter after about 20 pop ups it will give you about 2 seconds before the next series of pop ups. Thats when I hit save. Some times it stops the madness right there, sometimes I have to open task manager and shut down and re open.... Its a PITA but atleast I can save my work...

Quote