MULTI AXIS LEAD IN / OUT

[paulfell]

Not done much multi axis toolpaths - i want a lead in and lead out on every depth - i can get it to lead in on every depth or lead out - but not lead in and out on every depth ??

SWARF.mcam

[paulfell]

Example screenshot of lead in

 

 

[Müřlıń®]

Dock your ops manager and reload your file. for some reason I cannot access your ops.

 

NM I had to dock mine and close the file I was in and yours came in docked.....weird.

[paulfell]

What do you mean by ops manager ?

[Müřlıń®]

23 minutes ago, paulfell said:

What do you mean by ops manager ?

never mind I got it now...for some reason I could not access the ops manager on your file with another instance open.

Never ran into this before.

just FYI...I am using multiple monitors and evidently so are you.

 

We both have our ops undocked on a different monitor I am guessing and your ops was inaccessible to me

since I had another instance open.

I had to dock my ops manager and close the file I was in.

 

Then when I opened your file the ops manager came in docked for me and I could move it to my other monitor.

 

[Müřlıń®]

you have lead in lead out turned off

[nickbe10]

6 minutes ago, paulfell said:

What do you mean by ops manager ?

Hi Paul,

Your Ops Manager is the "window" your operations (toolpaths) reside in. It can be docked in the workspace or undocked and placed on a separate screen to give you a larger workspace.

[Müřlıń®]

[crazy^millman]

Change this page to this and should be good to go. The setting were set to Use lead-in only and not to Use Lead-In/Out You unclicked use default links so if you check it back what Murlin said above would apply.

 

 

 

[paulfell]

thats done it- great - thanks for the help