Record a toolpath verification

[Born to machine]

Hi,

Im sure ive seen somewhere in x9 that you can record a toolpath verification but im damed  if i can find it again..

Any ideas?

Thanks

 

[David Colin]

Do you want to save toolpath geometry (lines/arcs) ? If so in classic backplot window there is a button to save to a level.

If you want to make a standalone part verify interactive file I think it's been implemented in 2018 and later. 

[JoshC]

On ‎8‎/‎19‎/‎2018 at 1:00 AM, Born to machine said:

Hi,

Im sure ive seen somewhere in x9 that you can record a toolpath verification but im damed  if i can find it again..

Any ideas?

Thanks

 

Yea as David said that feature was not in X9, but you can save a presentation out of the Machine Simulation. that may give you what you need.