Maho 600 e2 serial communication

[Delem]

Hello

I have to communicate a maho 600 e2 cnc 432 Philips with mastercam and cimco edit  using RS232 serial communication.

Does anybody run into the same problem and solved it (cable,parameters)

Thank you in advance.

[crazy^millman]

It was answered here.

[Delem]

je need a clear answer  please

 

[Delem]

I need a clear answer please

[pullo]

1. Have you heard of google ?  I am being sarcastic here because I googled "data transfer to maho 432" and my

 first hit was 

 

Gracjan

[pullo]

http://www.connectcnc-dnc.com/Settings/Phillips-Maho432.html

[pullo]

https://www.cnczone.com/forums/deckel-maho-aciera-abene-mills/69489-maho-mh600e-cnc432-data-transfer-problems.html

[pullo]

Monsieur , it does not get any better than this info

Gracjan

[Delem]

Thank you so much I have this document .

I use this parameters  and the communication failed

 

[crazy^millman]

5 hours ago, Delem said:

Thank you so much I have this document .

I use this parameters  and the communication failed

 

Then you need to call a machine repair or tech company. Pullo is about as knowledgeable as they get and he provided information I have not seen in 25 years. Sorry you have an old machine, but you do and with that comes exactly what your facing.

[Chris In-House Solutions]

What error are you getting?  Are you using a laptop with a usb to serial device to send the files?  If you are there are settings hidden in the device manager under the advanced settings that you may have to play with to get this to work for you.  If you are using a usb to serial adaptor where did you purchase it from?  We've found only certain chipsets work in these devices.  If you bought it at staples or bestbuy it might not work for you. 

[Delem]

Hello

I do the communication between my maho 600 e2 and my pc

When I send a program to the machine an error message appears: baudratefehler

I change the value of baudrate but always the same message and the communication fail

 

[Delem]

J'utilise une câble série pour la communication

I use a serial cable

[LyonSanks]

Hello....Does anyone have a PC interchanges arrangement on this sort, or comparative factory?

In the fixing bureau on the rear of the machine there's 1 RS232C port, however there's a link in it that is wired in with a lot of others and vanishes into the machine. It doesn't resemble a link to be taken out, except if it winds up in a RS232 contact somewhere else on the machine (I've looked and I can't discover anything).