Some sort of bug in 2019 post concerning scandic letters.

[pullo]

 

it's a progessive thing . If you have the letters ä or ö  , every time you do something to the post it will at sometime change those letters to some other symbols.

 

So i had  these words as comments in my post

pääosin  and käytetään. After a while they look like this:

pääosin  -   pääosin

käytetään -  käytetään.

 

As time goes on and you either 1) use a post , or you 2) use a post and the post is open in an editor , or some other mechanism (I'm not sure of the mechanism) , these new letters will get exchanged for more gibberish until

you end up like I did with a line of over 246 columns. And then when you should get :

 

878 TOOL CALL 8 Z

879 M3

880 TOOL DEF7

You get  this :

873 M5

874 L Z-1. FMAX M91

 

I actually ended having this line in my post (as one line) :

käytetään pääosin Transform by Toolplane

 

this also goes for the german u and s because I'm getting these beauties here:

Rückzughöhe

Gewindegröße

Rückzugebene

 

Also one thing under suspicion is that I still use pfe32 for post editing .... although I've had these scandics in my post ever like forever only their editing within the 2019 environment has caused problems.

 

Gracjan 

[jlw™]

I'd love to help but I can't read your "good" text! 

[Zaffin_D]

Is the file being encoded as UTF-8 in your editor? 

[pullo]

The workaround  here is to get rid of all the scandics.  I copy pasted the text from the CNC forum and it came out bland...

Gracjan

[Zaffin_D]

You should send this in to CNC's post department.  Starting with 2019 the posts are encoded as UTF-8, and it seems like your charters are getting re-encoded.  I'm positive they want to investigate this issue.

[SlaveCam]

Yes, they switched from ANSI to UTF-8, which is a very good thing. Also when saving tool lists as .txt there are no longer '?' characters in place of scandics.