Dynamic feeds and speeds

[pip]

I'm back behind the wheel of Mastercam.  Many moons ago somebody in this forum started an excel sheet with members results for dynamic millng.

Is this still available, and where do I find it.  Trying to talk other workers into the benifits of dynamic milling. A bit of an uphill strugle. I have done a forum search but not found the link.

Thank you..

[Smit]

Here ya go

Dynamic mill database

Machining Advisor Pro has some good info

HSMAdvisor is useful too.

[pip]

cheers a lot. I knew you wouldn't let me down, that's why I stayed around..

Thanks

 

[jeff]

On 2/8/2019 at 6:46 AM, pip said:

Trying to talk other workers into the benifits of dynamic milling. A bit of an uphill strugle.

I always find that odd when people who run machines don't want to cut faster. The only reason is that they will have a shorter cycle time and therefore less time to stand around playing on their phone.

Personally, I've always had the mindset of doing it faster and more efficient. 

[htm01]

9 minutes ago, jeff said:

I always find that odd when people who run machines don't want to cut faster. The only reason is that they will have a shorter cycle time and therefore less time to stand around playing on their phone.

Personally, I've always had the mindset of doing it faster and more efficient. 

worked with a guy that we called 50% Bauer, because the first thing he did when he came in was turn speed and feed to 50%