els_answer
-
Posts
8 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by els_answer
-
I use the silhouette Boundery all the time. It is the last button in the geometry category. Add it to one of your tool bars.
-
Try setting your plane to lathe Diameter or lathe radius.
-
"C:mcamxdocumentationMASTERCAM X MR1.html"
-
There is a togle to turn the line numbers off and on in the machine definitions manager. machine definitions manager/edit the control definitions/NC Output/uncheck the output sequence number box.
-
Matt, You can use the wcs the same way. You will want to pick new plane (lathe radius or lathe diameter). Ernie S.
-
In Mastercam you don't have to pick geometry to single point threads. Pick machine type (lathe)>> lathe toolpaths >> thread >> then use the tabs in the Lathe Thread Properties window to set the thread tool, thread shape ect... Hope this helps Ernie S.
-
If you pick the entities you want to use for the bounding box and hit enter. It opens the window.
-
From the help; To select entities using the Chain selection method, hold down the Shift key and select a single entity that is part of a chain of other entities. Alternatively, you can choose Chain from the Selection Methods drop-down list and click an entity that is connected to other entities. For example, clicking one side of a rectangle selects all four sides and clicking one line that is connected to another selects both lines.